Compare the available Commission, Council and Parliament texts and amendments affecting this recital.
Recital total: 1 part · 3 Council drafts · 7 Parliament amendments
Removed wording is struck through; added or replacement wording is highlighted.
Institutional text
European Commission proposal
The wording proposed by the Commission at the start of this legislative file.
No standalone Commission wording is mapped to this tracked part. A newly proposed provision may have no earlier text of its own.
Commission source wording and instructions
Recital 17
Commission proposal
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of 31 Regulation (EC) No 223/2009 of the European Parliament and of the Council of 11 March 2009 on European statistics and repealing Regulation (EC, Euratom) No 1101/2008 of the European Parliament and of the Council on the transmission of data subject to statistical confidentiality to the Statistical Office of the European Communities, Council Regulation (EC) No 322/97 on Community Statistics, and Council Decision 89/382/EEC, Euratom establishing a Committee on the Statistical Programmes of the European Communities (OJ L 87, 31.3.2009, p. 164, ELI: http://data.europa.eu/eli/reg/2009/223/oj). the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Institutional text
Council Presidency texts
Successive Presidency compromise texts. Their inclusion does not imply agreement or adoption.
No Council wording is mapped to this tracked part.
Recital 17
June Presidency compromise · 10 June
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
June Presidency compromise · 18 June
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
September Presidency compromise
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17 3 Council drafts
Recital 17
10 June 2026 · June Presidency compromise · 10 June
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
18 June 2026 · June Presidency compromise · 18 June
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
3 September 2026 · September Presidency compromise
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Competing proposals
European Parliament amendments
These are alternative tabled amendments. An amendment affecting several tracked parts appears once here, with each target identified.
More filters
Political group at the amendment date where available; otherwise the current Parliament affiliation.
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Remove proposed wordingAmendment 97 · David Cormand JURI
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Remove proposed wordingAmendment 150 · David Cormand on behalf of the Verts/ALE Group IMCO
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Remove proposed wordingAmendment 161 · Elena Sancho Murillo, Marina Kaljurand, Brando Benifei, José Cepeda, Lina Gálvez, Francisco Assis, Alex Agius Saliba ITRE · LIBE
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Alternative wordingAmendment 162 · Diana Iovanovici Şoşoacă ITRE · LIBE
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution, as well as monitoring of service operation during the term of the contract, with a view to rectifying any problems or malfunctions. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider, but may subsequently be adapted for customers with similar requirements. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Alternative wordingAmendment 163 · Aura Salla, Niels Flemming Hansen, Ana Miguel Pedro, Andrea Wechsler, Christian Ehler ITRE · LIBE
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-madeadapted to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-madethose adapted services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Alternative wordingAmendment 164 · João Oliveira ITRE · LIBE
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of ChapterspecificVIinteroperability provisions of Regulation (EU) 2023/2854.
No amendments match these filters.
Selected texts
Compare wording
Choose a tracked part and a named pair of texts. Comparisons are offered only where both sides cover the same legal unit.
Select a specific tracked part above to compare wording.
No same-scope comparison is available for this tracked part. Its source wording remains available in the article text sections.
Recital 17
European Commission proposal → Council Presidency text · ST 10426/26
Changes in context
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of 31 Regulation (EC) No 223/2009 of the European Parliament and of the Council of 11 March 2009 on European statistics and repealing Regulation (EC, Euratom) No 1101/2008 of the European Parliament and of the Council on the transmission of data subject to statistical confidentiality to the Statistical Office of the European Communities, Council Regulation (EC) No 322/97 on Community Statistics, and Council Decision 89/382/EEC, Euratom establishing a Committee on the Statistical Programmes of the European Communities (OJ L 87, 31.3.2009, p. 164, ELI: http://data.europa.eu/eli/reg/2009/223/oj). the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
European Commission proposal
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of 31 Regulation (EC) No 223/2009 of the European Parliament and of the Council of 11 March 2009 on European statistics and repealing Regulation (EC, Euratom) No 1101/2008 of the European Parliament and of the Council on the transmission of data subject to statistical confidentiality to the Statistical Office of the European Communities, Council Regulation (EC) No 322/97 on Community Statistics, and Council Decision 89/382/EEC, Euratom establishing a Committee on the Statistical Programmes of the European Communities (OJ L 87, 31.3.2009, p. 164, ELI: http://data.europa.eu/eli/reg/2009/223/oj). the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Council Presidency text · ST 10426/26
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
Council Presidency text · ST 10426/26 → Council Presidency text · ST 10677/26
Changes in context
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Council Presidency text · ST 10426/26
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Council Presidency text · ST 10677/26
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
Council Presidency text · ST 10677/26 → Council Presidency text · ST 12535/26
Changes in context
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Council Presidency text · ST 10677/26
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Council Presidency text · ST 12535/26
Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer . Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Recital 17
Wording reproduced in the amendment → Amendment 161 · ITRE–LIBE amendments 79–250 to the draft report: removal
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Amendment 161 · ITRE–LIBE amendments 79–250 to the draft report: removal
Wording reproduced in the amendment → Amendment 162 · ITRE–LIBE amendments 79–250 to the draft report
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution, as well as monitoring of service operation during the term of the contract, with a view to rectifying any problems or malfunctions. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider, but may subsequently be adapted for customers with similar requirements. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Amendment 162 · ITRE–LIBE amendments 79–250 to the draft report
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution, as well as monitoring of service operation during the term of the contract, with a view to rectifying any problems or malfunctions. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider, but may subsequently be adapted for customers with similar requirements. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Wording reproduced in the amendment → Amendment 163 · ITRE–LIBE amendments 79–250 to the draft report
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-madeadapted to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-madethose adapted services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Amendment 163 · ITRE–LIBE amendments 79–250 to the draft report
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are adapted to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, those adapted services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Wording reproduced in the amendment → Amendment 164 · ITRE–LIBE amendments 79–250 to the draft report
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of ChapterspecificVIinteroperability provisions of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Amendment 164 · ITRE–LIBE amendments 79–250 to the draft report
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of specific interoperability provisions of Regulation (EU) 2023/2854.
Wording reproduced in the amendment → Amendment 150 · IMCO amendments 125–328 to the draft opinion: removal
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Amendment 150 · IMCO amendments 125–328 to the draft opinion: removal
Wording reproduced in the amendment → Amendment 13 · IMCO draft opinion · Alex Agius Saliba (rapporteur): removal
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Wording reproduced in the amendment → Amendment 97 · JURI amendments 69–296 to the draft opinion: removal
Changes in context
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
RemovedAdded
Both texts in full
Wording reproduced in the amendment
(17) Certain data processing services, which do not fall within the Infrastructure as a Service (IaaS) delivery model, are custom-made to the needs or ecosystem of a customer. The provision of such data processing services is based on time-intensive pre-contractual and contractual negotiations to determine the specific requirements of the customer and subsequent technical efforts to customise the data processing service and to deliver a tailored solution. Those are services not provided off-the-shelf and are personalised to the needs of a customer to provide a tailored solution where the majority of features and functionalities of the data processing service has been adapted by the provider to the specific needs of the customer where the majority of features and functionalities would not be usable for a customer without prior adaptation by the provider. Those services differ from custom-built data processing services referred to in Article 31(1) of Regulation (EU) 2023/2854. Custom-built data processing services are services of which the majority of main features has been custom-built to accommodate the specific needs of an individual customer or where those data processing services are not offered at broad commercial scale via the service catalogue of the provider. To avoid additional costs and administrative burden connected to the need to reopen and renegotiate contracts concluded before or on 12 September 2025, it is necessary to clarify that, with the exception of the obligation to reduce and ultimately remove switching and egress charges, custom-made services provided according to contracts concluded before or on 12 September 2025 should not fall within scope of Chapter VI of Regulation (EU) 2023/2854.
Amendment 97 · JURI amendments 69–296 to the draft opinion: removal